Life Science

This microtome is primarily intended for specimen surface preparation for: AFM, SPM, SEM, OM, FTIR. This microtome is also ideal for sectioning materials for Forensic, QC and Materials research applications.

For ultra-thin and semi-thin cryosectioning of biological specimens, plastics, polymers, paper and wood products, magnetic and photographic films and any other materials requiring low temperature thin sectioning over the range from +35°C to -185°C.

Automates routine EM-sample fixation and embedding, freeing up valuable laboratory time. The advanced design is suited for resin processing of light and electron microscopy specimens.

For trouble-free freeze-substitution and low temperature embedding on a routine basis.

High pressure freezing is the only method which allows freezing of aqueous samples up to 200µm thickness without visible ice crystal damage and without the use of cryo-protectants.

An economical manual-contol microtome for histology, materials and forensic applications. Section thickness range from 0.5 to 60µ with electronic knife feed.

Similar to MR2 but includes motorized operation with a variable cutting speed from 0 ? 400 mm/second and foot switch control for both cut & trim functions.

With a motorized, programmable automatic trim, the MT-990 microtome is a high-precision instrument for sectioning both hard and soft material. When paired with its CRT-900 cryo-sectioning attachment, this is the ideal instrument for polymer applications.

This touch-screen controlled ultramicrotome uses computer power to simplify sectioning operations while capturing essential information in its integrated database.

The ultramicrotomes with patented Power Drive® technology. When gravity fails, the powered cutting stroke has enough strength to cut through even hard, non-homogenous specimens.

Since most organic materials produce low-contrast results in transmission electron microscopy (TEM), staining procedures are needed to increase contrast. The QG-3000 increases staining quality and yield, while saving time and and reducing waste.